Login  -  About Us  -  Contact Us      

Phone: +64 9 634 1391
Email: sales@customcontrols.co.nz
Home | Regulators | Type 99 Pressure Reducing Regulator

Type 99 Pressure Reducing Regulator

Type 99 Pressure Reducing Regulator The Type 99 gas regulators provide a broad capacity for controlled pressure ranges and capacities in a wide variety of distribution, industrial, and commercial applications.

The Type 99 regulator has a Type 61L (low pressure), Type 61H (high pressure), or a Type 61HP (extra high pressure) pilot integrally mounted to the actuator casing. The Type 99 regulator can handle up to 1000 psig (69,0 bar) inlet pressures (the 1000 psig (69,0 bar) regulator requires a Type 1301F pilot supply regulator and a Type H110 pop relief valve). The pilot supply regulator reduces inlet pressure to a usable 200 psig (13,8 bar) for the extra high pressure pilot. This regulator comes standard with O-ring seals on the guide bushing and valve carrier to keep main valve body outlet pressure from interfering with outlet pressure in the lower casing assembly.

Features
  • Wide Variety of Applications
  • Accuracy
  • No Atmospheric Bleed
  • Can Handle High Inlet Pressures
  • Easily Modified for Special Service
  • High Capacity Pressure Control
  • Economical, Labor-Saving Installation
  • Low Flow Control
  • Tight Shutoff
  • Easy to Maintain
  • Three Pilots to Choose From
Body Sizes and End Connection Styles
2 NPT; NPS 2 ANSI CL125, CL150, CL250, or CL300 flanged; or SWE

Maximum Inlet Pressure
160 psig (11,0 bar) to 1000 psig (69,0 bar)
Maximum Outlet Pressures
100 psig (6,9 bar)

Outlet Pressure Ranges
2-inches w.c. to 100 psig (5 mbar to 6,9 bar) in nine ranges

Pressure Registration
Internal

Temperature Capabilities
  • With Nitrile (NBR) / Neoprene (CR): -20º to 180ºF (-29º to 82ºC)
  • With Fluoroelastomer (FKM): 0 to 300ºF (-18º to 149ºC)
Approximate Weight
115 Pounds (52 kg)


For general enquires contact us at (+64) 9 634 1391 or by email at sales@customcontrols.co.nz

Website Design By Smart Software