Login  -  About Us  -  Contact Us      

Phone: +64 9 634 1391
Email: sales@customcontrols.co.nz
Home | Regulators | Type ACE95Jr Tank Blanketing Valve

Type ACE95Jr Tank Blanketing Valve

Type ACE95Jr Tank Blanketing Valve The Type ACE95jr is a direct-operated valve used for accurate pressure control on low-pressure blanketing systems. The unit is stainless steel, and actuated by a very large diaphragm actuator. Blanketing setpoint is controlled by a single adjusting screw.

The oversized actuator offers high sensitivity to changes in tank pressure, increasing accuracy. A rolling diaphragm is utilized to maintain a fully balanced main valve, insuring extremely accurate operation under all conditions. Lockup is typically less than 0.3 inches w.c. (1,2 mbar). The main valve stroke is minimal to further insure accuracy and fast response.

Features
  • Fully Balanced Plug Design Reduces Inlet Pressure Sensitivity
  • Stainless Steel Construction Available
  • High Sensitivity
  • Self-Contained
  • Bubble Tight Shutoff
  • Vacuum Settings Available
Sizes and End Connection Styles
  • 1/2 NPT
  • 1 x 1/2 NPT
  • 1 NPT
  • NPS 1/2 (DN 15), CL150 RF
  • NPS 1 (DN 25), CL150 RF
  • NPS 1 x 1/2 (DN 25 x 15), CL150 RF
  • NPS 1 (DN 25), Sanitary Flange
Maximum Inlet Pressure
200 psig (13,8 bar)

Outlet Pressure Ranges
-5 inch w.c. to 5 psig (-1 to 103 mbar) in six ranges.

Pressure Registration
External

Temperature Capabilities
  • Nitrile (NBR): -20° to 180°F (-29° to 82°C)
  • Fluorocarbon (FKM): 0° to 212°F (-18° to 100°C)
  • Ethylenepropylene (EPDM - FDA): -20° to 212°F (-29° to 100°C)
  • Perfluoroelastomer (FFKM): -20° to 212°F (-29° to 100°C)
Approximate Weight
30 Pounds (14 kg)


For general enquires contact us at (+64) 9 634 1391 or by email at sales@customcontrols.co.nz

Website Design By Smart Software