Type ACE95 Vapor Saver Tank Blanketing Valve

Type ACE95 Vapor Saver Tank Blanketing Valve The Type ACE95 vapor saver is a pilot-operated valve used for accurate pressure control on low pressure blanketing systems. The unit is stainless steel, and actuated by a very large, 76-inches2 (490 cm2), diaphragm actuator. Blanketing setpoint is controlled by a single adjusting screw.

The oversized actuator offers high sensitivity to changes in tank pressure, increasing accuracy. A rolling diaphragm is utilized to maintain a fully balanced main valve, ensuring extremely accurate operation under all conditions. Lockup is typically less than 0.3-inch w.c. (0,7 mbar). The main valve stroke is minimal to further insure accuracy and fast response.

Features

Stainless Steel Construction
Angled or In-Line Body Option
Fully Balanced Main Valve
Rolling Diaphragm
High Sensitivity
Extremely Accurate Control
Chemically Compatible Elastomers
Optional Single Tank Connection
Diagnostic Port for Servicing

Body Sizes and End Connection Styles

Angled Body
- 3/4, 1 NPT
- NPS 1 (DN 25), CL150RF, CL300RF, PN 16/25/40RF, Sanitary Flange
In-Line Body
- 3/4, 1 NPT
- NPS 1 (DN 25), CL150RF, CL300RF, PN 16/25/40RF, Sanitary Flange
- NPS 1 x 2 (DN 25 x 50) CL150RF, PN 16/25/40RF

Maximum Inlet Pressure
200 psig (13,8 bar)

Outlet Pressure Ranges
-5-inch w.c. to 1.5 psig (-1 to 103 mbar) in six ranges

Pressure Registration
External

Temperature Capabilities

Nitrile (NBR): -20° to 180°F (-29° to 82°C)
Fluorocarbon (FKM): 0° to 212°F (-18° to 100°C)
Ethylenepropylene (EPDM - FDA): -20° to 212°F (-29° to 100°C)
Perfluoroelastomer (FFKM): -20° to 212°F (-29° to 100°C)
Polytetrafluoroethylene (PTFE): -20° to 212°F (-29° to 100°C)

Approximate Weight
40 Pounds (18 kg)